Makpatch FC
Description
Makpatch FC cementitious fairing coat is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious fairing mortar. Makpatch FC is based on a blend of cements, graded aggregates, special fillers and chemical additives to provide a material with good handling characteristics with ease of application. Makpatch FC cementitious fairing coat is designed for vertical and overhead use to infill blow holes, honeycombing and voids up to 5mm deep in the surface of concrete.
Recommended Uses
• Available in 3 colours – white, off white and grey
• Filling in imperfections on honeycomb or pinholes on concrete surfaces.
• Repair to defects in concrete surface
• For use on vertical application
• Stand alone or left exposed application that does not require an additional coating
• Internal and external application
• Surface imperfections up to 5mm in depth can be filled with one coat application.
• Used independently to infill surface imperfections and voids or to render large sections of concrete or masonry ranging from feather edge up to 5mm thickness.
Features & Benefits
• Fast setting
• Excellent bond to concrete – substrate
• Internal/External application produces a smooth finish
• Easy to use – simply add water – no primer needed in most cases
• Durable repair
• Excellent workability
• Can be over coated with conventional surface coatings
• Can be left exposed as finished final coat
• Pre-blended to overcome site-batched variations – only the site addition of clean water is required
• Can be applied from feather edge to 5mm in a single application
